Software de Diseño de Estaciones Transformadoras
-
MPAT:
Program for calculating mesh grounding of EETT in accordance with ANSI / IEEE 80. Allows testing of an existing grid or design a new type for transformer stations outside of EAT, AT or MT.
-
CONET:
Mechanical calculation software drivers lying on transformer stations. Admits conductor bundle, and configurations heterogeneous (derivations, intermediate insulator chains, etc.).. Drivers are checked for the climatic zone 8 installation and loading conditions. Determined efforts on the porches and produces tables tended to mount.
-
CALCEC:
Program for calculating training section and calculation of cable lengths and low voltage for auxiliary services or industrial EETT radial distribution.
Given its location and loads the program determines the sections of cable voltage drop, short circuit current and permanent. Computes lengths and sections in the horizontal plane in orthogonal coordinates. Supports three-phase circuits, single phase AC and DC circuits. Provides results with tripolar and unipolar formations.
-
ISOLUX:
Program for calculating light level for a grid chosen. Values determine average, maximum, minimum and uniformity ratio. This program has Isocandela files (PI) for different commercial fixtures commonly used in such facilities.
